Introduction

Thank you for choosing Siemens TPS3 Surge Protective Device (SPD). This is a high quality, high energy surge suppressor designed to protect sensitive equipment from damaging transient overvoltages.

Proper installation is important to maximize performance. Please follow the steps outlined herein.

This entire user manual should be read prior to beginning installation. These instructions are not intended to replace national or local codes. Follow all applicable electrical codes to ensure compliance. Installation of this SPD should only be performed by qualified electrical personnel.

All Siemens SPDs are extensively tested in accordance with industry standards such as ANSI/IEEE C62.41.1, C62.41.2, C62.45, C62.62, C62.72, UL 1449, UL 1283, IEC 61643, etc.

Warning and Safety Information

This equipment contains hazardous voltages. Death, serious injury, or property damage can result if safety instructions are not followed. Only qualified personnel should work on or around this equipment after becoming thoroughly familiar with all warnings, safety notices, and maintenance procedures contained herein.

The successful and safe operation of this equipment is dependent upon proper handling, installation, operation, and maintenance.

Qualified Person

For the purposes of this manual and product labels, a QUALIFIED PERSON is one who is familiar with the installation, construction, and operation of this equipment, and the hazards involved. In addition, he or she has the following qualifications:

(a)Is trained and authorized to energize, deenergize, clear, ground and tag circuits and equipment in accordance with established safety practices.

(b)Is trained in the proper care and use of personal protective equipment (PPE) such as rubber gloves, hard hat, safety glasses or face shields, flash clothing, etc. in accordance with established safety practices.

(c)Is trained in rendering first aid.

Danger

For the purposes of this manual and product labels, DANGER indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

Warning

For the purposes of this manual and product labels, WARNING indicates failure to following these instructions can result in death, serious injury, or equipment damage.

Caution

For the purposes of this manual and product labels, CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.

These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible contingency to be met in connection with installation, operation or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred to the local Siemens sales office.

Do Not Hi-Pot Test SPDs

Any factory or on-site testing of power distribution equipment that exceedsnormaloperatingvoltagesuchashigh-potentialinsulation testing, or any other tests where the suppression components will be subjected to higher voltage than their rated Maximum Continuous Operating Voltage (MCOV) must be conducted with the SPD disconnected from the power source. For 4-wire systems, the neutral connection at the SPD must also be disconnected prior to performing high-potential testing and then reconnected after test completion.

Failure to disconnect SPD and associated components during elevated voltage testing will damage the SPD and will void the warranty.

Limited Warranty

Siemens warrants its AC Panel protection products against defective workmanship and materials for 10 years. Liability is limited to the repair or replacement of the defective product at Siemens’ option. A Return Material Authorization number (RA#) must be given by the company prior to the return of any product. Returned products must be sent to the factory with the transportation charges prepaid. In addition, the company also warranties unlimited replacement of modular and component parts within the warranty period previously described.

The company specifically disclaims all other warranties, expressed or implied. Additionally, the company is not be responsible for incidental or consequential damages resulting from any defect in any product or component thereof.

The sales contract contains the entire obligation of Siemens. This instruction manual shall not become part of or modify any prior existing agreement, commitment or relationship.

Unpacking and Preliminary Inspection

Inspect the entire shipping container for damage or signs of mishandling before unpacking the unit. Remove the packing material and further inspect the unit for any obvious shipping damages. If any damage was found and is a result of shipping or handling, immediately file a claim with the shipping company and forward a copy to your local Siemens sales office.

1

Page 3 Page 5
Page 4
Image 4
Siemens TPS3 user manual Introduction, Do Not Hi-Pot Test SPDs
Page 3 Page 5

TPS3 specifications

Siemens TPS3 is a sophisticated technology advancement that has significantly impacted the field of industrial automation. As part of Siemens’ portfolio of control systems, TPS3 is designed to enhance process efficiency, improve accuracy in operations, and ensure greater reliability and flexibility across various industrial sectors.

One of the key features of the Siemens TPS3 is its modular architecture. This modularity allows users to customize the system according to their specific needs and operational requirements. Each module can be added or removed with ease, facilitating the scalability of operations. This flexibility is critical for businesses aiming to adapt their capacity based on fluctuating market demands.

The TPS3 employs state-of-the-art control technologies, integrating advanced algorithms for real-time data processing and control. This capability enables operators to achieve precise control over processes, ensuring that production runs smoothly and meets quality standards. Advanced predictive maintenance features are also embedded within the system, allowing for the minimization of downtime and optimization of maintenance schedules through data analytics.

Another significant characteristic of the TPS3 is its user-friendly interface. The intuitive design allows operators to easily monitor and manage processes through graphical displays and straightforward navigation. This usability reduces the learning curve for new staff and increases overall operational efficiency.

Siemens emphasizes connectivity in the TPS3, with robust support for Industry 4.0 principles. The system can seamlessly integrate with IoT devices and other digital platforms, enabling extensive data collection and analytics. This connectivity enhances decision-making by providing insights into process performance and resource utilization.

Security is also a critical aspect of the TPS3, with built-in features that protect against cyber threats. These security measures include encrypted communication protocols and robust firewall systems to safeguard sensitive operational data.

Overall, the Siemens TPS3 stands out for its modular design, real-time control capabilities, user-friendly interface, strong connectivity features, and commitment to security. These characteristics make it a potent tool for modern industries seeking to optimize their processes, reduce costs, and adapt to the ever-evolving technological landscape. With its comprehensive feature set, the TPS3 is poised to drive greater efficiency and innovation in the realm of industrial automation.
Top Page Image Contents