Siemens WFXD5200UC manual Transport, such as when moving out

￿ When the water is being drained￿ check that the water flow out of the sink is adequate.

￿ Attach water drain hose securely to sink.

￿ Prepare the transport bolts: Loosen the screw in the sleeve until the end of the screw is level with the end of the sleeve.

Water drainage In-Wall Installation

￿ CAUTION ￿

Do not bend or pull the water drainage hose.

Height difference between the installation location of the washing machine and the drainage point: Maximum 8 feet￿/ 244 cm.

Transport, such as when moving out

Before transporting the washing machine:

-Turn off the water.

-Disconnect the washing

machine from the main outlet.

-Dismantle the supply and drainage hoses.

Connecting the water drainage hose

￿ Use the elbow.		Attach		the	-
elbow to	the end		of the hose
and insert	end	of	hose	into wall
					i
drain.

￿Use a strap or cable tie to hold hose in place.

Drainage into a siphon

Install the transport bolts.

Having transported the appliance and ensured proper installation and connection￿ allow thedrain program to run through before starting the first wash program.

Preparing and inserting the transport bolts

￿Attach the drain hose to the end of the drain connection.

￿Secure the connection point

with	the clamp.	￿ Secure	the	connection point
Use	a screwdriver!	with a	hose	clip￿not included in￿ Remove the covers.
		factory-supplied equipment￿.

Standpipe Installation

Drainage into a sink

￿ CAUTION ￿

￿

Ensure that the plug is not in the drain hole.

￿Use the elbow. Attach the elbow to the end of the hose and insert end of hose into standpipe.

￿Use a strap or cable tie to hold hose in place.

Insert and tighten all transport bolts. The lug on the washing machine must be located in the groove in the rear panel of the housing.

11