AirCard® 595U USB modem - User Guide
Connection Status Area
The Connection Status Area uses the icons shown in the following table.
Table 6-1: Connection Status Area icons
Icon | Meaning |
|
|
AirCard USB modem not detected (displayed in the left part of the
Connection Status Area).
The Signal Strength indicator (displayed in the left part of the Connection Status Area) uses bars to show the intensity of the radio signal. The number of bars increases as signal strength increases to a maximum of five bars.
When the bars are dimmed and the antenna icon is crossed out, no connection is possible for one of these reasons:
•You are outside the CDMA network coverage area
•The signal strength is too weak
•A network or account problem is preventing the AirCard USB modem from obtaining service
Indicates whether
Indicates whether
Indicates whether 1X is available in this area. (Not displayed if
The Roaming Status indicator shows whether you are roaming onto the network of a service provider other than your own.
When the indicator is off (gray), you are within the local coverage area of your service provider. When the indicator is on (solid black), you are in a “preferred” roaming area. When the indicator is blinking, you are within the coverage area of a CDMA network but not in a “preferred” roaming area.
Your coverage area and account charges depend upon your service provider and the type of account you have. There may be surcharges for roaming service that vary based on whether you are in a preferred or
The In Use indicator shows whether a call is in progress. No icon is displayed when the AirCard USB modem is idle. Otherwise, one of these icons is displayed:
A
A
|
|
|
|
|
|
|
27 |
|
|
|
|
| 2130750 |
|
|
|
