Rev 3.0 B 2/15/08 5
2: Quick Start•Before You Start
•Configuring the Raven
X
•Configuring the IP
Address and
Interface Port of the
RJ-11 RJ-11 IP
Gateway Defaults
ConfiguringtheRJ‐11IPGatewaytoworkwithyourSierra
WirelessAirlinkRavenXandvice‐versaiseasy.Thischapter
coversabasicconfiguration.Formoreadvancedconfiguration
ofyourRavenX,refertothemodem’suserguide.The
completeconfigurationoptionsfortheRJ‐11IPGatewayarein
thisguide.
Before You Start
Software Re quired
•AceManager‐Graphicalinterfaceforconfiguringyour
SierraWirelessAirLinkmodem.AceManagerislocatedon
allmodemtheCDsoryoucandownloadAceManager
fromtheSierraWirelesswebsit e:http://
www.sierrawireless.com.Adefaultinstallationofthis
utilityisassumedlaterinthesedirections.
Hardware Require d
•EthernetCable‐TheRJ‐11IPGatewayandRavenXhave
anauto‐sensingEthernetport,youcanuseeitheracross‐
overcableorastraight‐throughEthernetcable.
•Poweradaptersandapowersource‐Youwillneeda
poweradapterandpowersourceforboththeRJ‐11IP
GatewayandtheRavenX.
Note: If you are using a Raven-E, you may need a cross-over cable
to connect to the RJ-11 IP Gateway.
•PCorLaptop‐ToconfigureboththeRJ‐11IPGateway
andthedevice,youwillneedacomputerwithInternet
Access,otherthanthecellularaccount,andanavailable
Ethernetport.