Sierra Wireless RJ-11 Configuring your Raven X for the RJ-11 IP Gateway

DocTitleHeader

6 2120028

•CellularAccount‐Tousethisguide,youneedtoalready

haveanactiveaccountwithacellularproviderandtohave

activatedyourmodemwiththatprovider.SierraWireless

AirLinkmodemsarecertifiedtoworkwithavarietyof

cellularproviders.

Tip: If you need to activate your modem, you can use the Setup

Wizard for your cellular provider which you can obtain from the Sierra

Wireless website: http://

www.sierrawireless.com.

•PortBlocking‐ManycellularprovidersandotherISPs

blockportsbelow1024whicharethedefaultportsfor

manyserverprotocols(suchasHTTP,telnet,andSSH).If

yourproviderblockstheseports,youwillneedto

configureportsyoucanaccess.

Configuring your Raven X for the RJ-11 IP Gateway

Note: While this guide application note covers installing an RJ-11 IP

Gateway with a Raven X, the RJ-11 IP Gateway is also designed to

work with the Raven-E and any other Airlink modem with an Ethernet

connection, using the same configuration outlined here

Thesestepsarejustabasicconfigurationtogetyoustartedand

allowtheRavenXtoconnectwiththeRJ‐11IPGateway.Refer

totheuserguideformoreconfigurationoptionsforspecific

environments.

Note: Omit this section if you are

not connecting your Host RJ-11

IP Gateway to a Raven X.

•ManagementInterfaceIPAddress:192.168.13.31.

•Telne tandWireless Acepassword:12345

•DHCPserver:enabled.

•PublicMode‐theIPAddressassignedbythecarrieris

assignedtotheRJ‐11IPGateway.