![](/images/new-backgrounds/1187614/18761433x1.webp)
DocTitleHeader
a.
4.Select Serial Settings from the menu on the left.
The Serial Settings page allows you to specify the baud rate, protocol, character size, parity, stop bits, and flow control behavior for the RJ‐11 port (Phone).
Figure 2-10: RJ-11 IP Gateway: Serial Settings
For more information on the serial and other settings, refer to page 17.
Note: For most configurations, the defaults for the other settings are best. Change these parameters only if you know the device you will be connecting to the
5.Click on the Reset/Reboot menu option for the IP Address configuration and any changes to the serial port settings to take effect.
|
|
|
|
|
|
|
12 |
|
|
|
|
| 2120028 |
|
|
|