System MaintenanceSection 6-11

6-11

System Maintenance

 

 

 

The NT631/NT631C has the following maintenance and check functions.

 

 

 

 

 

Item

Function

Page

 

 

 

I/O Settings

Adjustment of display panel contrast and brightness of the backlight.

187

 

 

 

Calendar Check

Display and setting of the time data of the NT631/NT631C clock function.

191

 

 

 

PT Settings

Direct connection setting of the screen data in the NT631/NT631C and display of the

193

 

 

setting statuses of the serial ports.

 

 

 

 

Display history record

Display and printing of display history record data.

194

 

 

 

Alarm history record

Display and printing of alarm history record data.

196

 

 

 

Screen data check

Display of each screen stored in the NT631/NT631C.

198

 

 

 

 

I/O

Device check

Checking of the I/O functions of the NT631/NT631C.

201

check

 

 

 

I/F check

Checking of the communications functions of the NT631/NT631C.

209

 

 

 

 

 

This section describes how to use these functions.

6-11-1 I/O Settings

Contrast Adjustment (for NT631C-ST141@-EV1 only)

This function is used to adjust the contrast of the display panel and the bright- ness of the backlight.

With the NT631/631C, you can adjust the contrast and brightness settings using either of the following two methods.

Setting from the System Menu

Adjusting the contrast: Select System Menu/Maintenance Mode/I/O Settings/ Contrast Adjust.

Adjusting the brightness: Select System Menu/Maintenance Mode/I/O Set- tings/Brightness Adjust.

Setting Using Special Screen During PT Operation

You can set the brightness and contrast by displaying the screen with the fol- lowing number, using a touch switch with a switch screen function, or by spec- ifying the display screen in the PT status control area.

Screen number 9030: Brightness and contrast adjustment screen.

The NT631C-ST141@-EV1 allows the contrast to be adjusted in 100 steps. The CONTRAST ADJUST screen enables you to make the adjustment while actually checking the contrast on the screen. Once the contrast has been set, it remains in effect even if the power is turned OFF or the NT631/NT631C is reset (and even if the voltage of the built-in battery becomes low).

187

Page 204
Image 204
Omron manual System Maintenance, 11-1 I/O Settings, Contrast Adjustment for NT631C-ST141@-EV1 only