Omron NT631 Specifying The Display Method, Operations On The Screen Data Check Screen, On, Off

System Maintenance		Section 6-11
	Specifying The Display Method
	Specify the display method for the screens as indicated in the table below.
Setting Item	Function		Setting
			Options
Display of Lamp/	Allows designation of whether the bit number of the lamp bit set for a lamp or touch		ON, OFF*
Touch SW No.	switch is displayed or not.
	The display format is as follows L@❍❍❍❍❍❍❍(@: area type, ❍❍❍❍❍❍❍: bit num-
	ber).
Display of Memory	Allows designation of whether the table numbers of numeral and character string		ON, OFF*
Table No.	memory tables are displayed or not.
	The display format for numeral memory tables is N❍❍❍❍and the display format for
	character string memory tables is S❍❍❍❍.
	This function is valid for the following display elements.
	- Numeral displays
	- Character string displays
	- Bar graphs
	- Numeral setting input fields (including thumbwheel type)
	- Character string input fields
Display of image/	Allows designation of whether image/library code numbers are displayed or not.		ON, OFF*
Library No.
Display of Broken	Allows designation of whether or not broken line frames are displayed around the dis-		ON, OFF*
Line Frame	play elements for showing the positions registered.

* Default (factory) setting

Reference: Each setting of the screen data check is effective only on this menu. Exiting from this screen data check menu resets the settings to the default (all the settings are set to OFF).

Operations On The SCREEN DATA CHECK Screen

The function shown below can be set on the SCREEN DATA CHECK screen.

Use this function as required when displaying complex screens on which mul- tiple display elements have been registered overlapping each other.

a) Equivalent to 2 touch switches (14.4 mm) NT631 : 14.4 mm NT631C : 13.2 mm

c)

b) Equivalent to 2 touch switches (14.4 mm)

NT631 : 14.4 mm

NT631C : 13.2 mm

a.Display the previous display element on the upper most portion of the screen in the order in which the display elements were registered (ex- cluding fixed display elements).

b.Display the next display element on the upper most portion of the screen in the order in which the display elements were registered (ex- cluding fixed display elements).

c.Return to the screen on which screens are specified.

199