Omron NT631C manual Touch panel to display the System Menu

Programming Console Function Section 6-12

6-12-3 Method of Use

The Programming Console screen is displayed by operating the system menu as described below.

Ver 4.12

Select Expansion Mode.

Select Programming Console.

			The Programming Console screen is
			displayed.
			Press the Programming Console sheet
			keys (touch switches) for the operation.
			Press the Quit touch switch to exit the
			screen.
			An error is displayed if a wrong
			communications protocol is selected
			or a Programming Console is
			connected to the peripheral port.(*1)
	*1 With the CS1G/CS1H, the Programming Console function can not be used
		simultaneously at both the built-in RS-232C port and peripheral port.
Reference:	If an error screen is displayed, the System Menu can be displayed from the
	error screen by pressing two of the four corners of the touch panel
	simultaneously. Pressing the OK touch switch on the error screen will return
	the display to that immediately before the error occurred, but only if the cause
	of the error is removed. If this does not happen, press two of the four corners
	of the touch panel to display the System Menu.
Key Operations	Mode Selection Keys, Mode Lock Key
	The display element on the Programming Console screen shown below com-
	prises the mode selection keys, which change the operation mode of the PLC,
	and the mode lock key, which prevents unintended mode changes.
			Mode selection keys
			Mode lock key

217