Omron NT631C manual Menu Item Function, RUN Mode

Operation Modes and the System Menu Section 6-3

[RUN Mode]

		This is the mode in which
		the NT631/NT631C
		operates.In this mode the
		NT631/NT631C can be
		controlled from the host,
		and various display and
		I/O operations are
		possible.
When system			To change system
			settings or screen
settings and screen			data contents.
data registration have
been completed.
	To change system
	settings or screen
				SYSTEM MENU
	data contents.
				Quit
	Power ON			Transmit Mode
				Maintenance Mode
				Expansion Mode

If there is no system program, or if the settings for data control are changed...

[System Installer Mode]

In this mode, the system program of the NT631/NT631C is installed, display of the System Menu is enabled or disabled, and screen data changes are enabled and disabled, among other operations.

[Transmit Mode]

In this mode, screen data and other data are transmitted between the Support Tool and the NT631/NT631C.

[Maintenance Mode]

In this mode, NT631/NT631C maintenance operations, such as initialization of the memory, checking settings, and the I/O check, are executed.

[Expansion Mode]

In this mode, the Programming Console function is used, or check the version of system program.

Items in the System Menu The items displayed in the system menu and their functions are as follows.

Menu Item	Function
Quit	Clear the System Menu screen and return to the RUN mode
	screen.
Transmit Mode	Display the Transmit Mode screen to allow transmission for
	screen data between the Support Tool and the NT631/NT631C.
	For details on transmission of screen data, refer to 6-6 Transmit-
	ting the Screen Data.

131