Omron NT631C manual Checking Communications with a Printer, Select Maintenance Mode

System Maintenance Section 6-11

Checking Communications with a Printer

Check communications with a printer by following the menu operation from the System Menu shown below.

Ver 4.12 Select Maintenance Mode.

Select I/O Check.

Select I/F Check.

Select Printer.

Confirm that a printer is connected to the NT631/NT631C, then press Execute: Printer Interface Check will be printed out at the printer.

•While data is being sent to the printer, the message Checking Now... is displayed.

•When the sending of data to the printer is completed, Finished Normal by Printer Interface Check is displayed.

213