Omron NT631C manual Setting the Time-out Interval

Various System Settings Section 6-9

6-9-12 Setting the Time-out Interval

The NT631/NT631C goes into the time-out error status if no response is received from the host within a fixed time. The Time-out Interval setting speci- fies the time lapse at which time-out is judged to have occurred.

The setting range is 1 to 10 seconds. The default (factory) setting is 1 second.

Reference: Whether or not an error screen is displayed when a time-out error occurs is determined by the setting for the Comm. Auto-return memory switch.

Set the time-out interval by following the menu operation from the System

Menu shown below.

Ver 4.12

Select Maintenance Mode.

Select Memory Switch.

Press [↓] (next screen) or [↑] (previous

screen) to display the third memory switch setting screen.

Press Time-out Interval to display the required time lapse.

The setting option changes each time the touch switch is pressed, according to the following sequence.

01 02 03 .... 09 10 01 ....

To set other memory switches, select the relevant screen using the [] (next screen) or [ ] (previous screen) touch switch, then make the setting.

181