Memory Initialization

Section 6-4

Initialize the display history record data by following the menu operation from the System Menu shown below.

Ver 4.12

Select Maintenance Mode.

Select Memory Init..

Select Display History.

Select Yes.

The display history record data is initialized. During initialization, the message Initializing is displayed.

If No is selected, the NT631/NT631C returns to the MEMORY INIT. MENU screen without initializing the display history record data.

On completion of display history record data initialization, the message Fin- ished is displayed and the NT631/NT631C returns to the MEMORY INIT. MENU screen.

6-4-3 Initializing Alarm History Record Data

The alarm history record function continually checks the status of host bits that have been designated in advance with a bit memory table, and records the time when any of the bits is set to 1 (comes ON), and the number of times that each bit comes ON.

138

Page 155
Image 155
Omron NT631C manual Initializing Alarm History Record Data