Various System Settings

Section 6-9

For details on the print function, refer to 2-15-7 Print Function in the Ref- erence Manual.

Set the print method setting by following the menu operation from the System

Menu shown below.

Ver 4.12

Select Maintenance Mode.

Select Memory Switch.

Press Print Method to display the required printing method.

The setting option changes each time the touch switch is pressed.

To set other memory switches, select the relevant screen using the [ ] (next screen) or [ ] (previous screen) touch switch, then make the setting.

To confirm the settings and quit the memory switch setting screen, press the Quit touch switch. The settings made last will be set and the NT631/ NT631C will return to the MAINTENANCE MODE MENU screen.

To quit the memory switch setting screen without confirming the settings, press the Abort touch switch. The NT631/NT631C will return to the MAIN- TENANCE MODE MENU screen with the previous settings still in effect.

6-9-7 Setting Screen Saver Movement

The NT631/NT631C has a function to prevent the formation of an afterimage by turning off the screen display if no operation is performed for a certain period of time, and then displaying character strings at random positions and in random colors (the colors only change for the NT631C).

The Screen Saver Movement setting determines whether or not these charac- ter strings are displayed while the screen display is off.

If Display is selected, the character string stored in character string memory table No. 0 is displayed.

170

Page 187
Image 187
Omron NT631C manual Setting Screen Saver Movement