Omron NT631C manual Reference Checking the Battery Voltage

System Maintenance Section 6-11

Reference:

Checking the Battery Voltage

To end the check, press the touch switch at the top right corner (NT631: dis-

played in reverse video; NT631C: displayed in yellow). The NT631/NT631C will return to the DEVICE CHECK MENU.

•The host is not notified of the operation of touch switches pressed during the I/O check.

•The check cannot be performed until the touch switch at the top right cor- ner is displayed in reverse video (for NT631) or displayed in yellow (NT631C). Start the check after the status of the touch switch at the top right corner has changed.

Check the voltage of the NT631/NT631C’s built-in battery by following the menu operation from the System Menu shown below.

Ver 4.12 Select Maintenance Mode.

Select I/O Check.

Select Device Check.

Select Battery.

208