Omron NT631C manual 142

Memory Initialization Section 6-4

When the memory tables are initialized, they are returned to their initial values regardless of the setting made for the resume function (page 177).

If ON is set for the Resume Function memory switch, the initial values set with the Support Tool will not be recorded in the memory tables unless they are ini- tialized.

Reference: • If OFF is set for the Resume Function memory switch, the memory tables can be initialized just by switching the NT631/NT631C power off and back on again, or by resetting the NT631/NT631C (page 177).

•The bit memory table merely reflects the statuses of bits at the host and therefore cannot be initialized.

Initialize the memory tables by following the menu operation from the System

Menu shown below.

Ver 4.12

Select Maintenance Mode.

Select Memory Init..

Select Memory Table.

Select Yes.

The memory tables are initialized.

During initialization, the message

Initializing is displayed.

142