Omron NT631C manual Cables with Connectors Made by Omron, C200HX/HG/HE-ZE, Ifvv-Sb

Connecting to the Host’s RS-232C Port				Section 5-1
	Name	Model	Remarks	Delivered with
	Connector	XM2S-0911	9-pin type	C-series CQM1, C200HS,
	hood		Made by OMRON	C200HX/HG/HE(-Z)E
				CVM1/CV-series CPU Units
				CV500-LK201
		XM2S-0913	Made by OMRON 9-pin
		XM2S-0911-E	Made by OMRON 9-pin	CS/CJ-series CPU Units
		XM2S-2511	25-pin type	C500-LK203
			Made by OMRON	3G2A5-LK201-EV1
				C200H-LK201-V1
		DB-C2-J9	25-pin type	3G2A5-LK201-EV1
			Made by JAE	3G2A6-LK201-EV1
	Cable	AWG28⋅5P	Multi-core shielded
		IFVV-SB	cable
			Made by Fujikura, Ltd.
		CO-MA-VV-SB	Multi-core shielded
		5P⋅28AWG	cable
			Made by Hitachi, Ltd.

Cables with Connectors Made by OMRON

When connecting an NT-AL001 and a PLC, use the OMRON cables with con- nectors indicated in the table below.

Model	Cable Length	Connector Specification
XW2Z-070T-1	0.7 m	9-pin ⇔ 9-pin
		Host link, NT Link (1:1), NT Link (1:N)
XW2Z-200T-1	2 m
		+5 V power supplied from PLC
		(Use when the PLC has a +5 V output.)

Note 1. The maximum tensile load of the recommended cable is 30 N. Do not ex- ceed this load.

2. After connecting a connecting cable, always tighten the connector screws.

Recommended Connectors, Cables and Crimp Terminals for RS-422A/ 485

When making an RS-422A/485 connecting cable, as far as possible use the recommended parts indicated in the table below. Some Units come supplied with one connector and connector hood.

Check the required parts and prepare them in advance.

Name	Model	Maker	Remarks
Connector	XM2A-2501	25-pin type	Delivered with the following
		Made by OMRON	Units:
			C500-LK203
	DB-25P F-N	25-pin type	Delivered with the following
		Made by JAE	Units:
			3G2A6-LK201-EV1
			3G2A5-LK201-EV1
Connector	XM2S-2511	25-pin type	Delivered with the following
hood		Made by OMRON	Units:
			C500-LK203
	DB-C2-J9	25-pin type	Delivered with the following
		Made by JAE	Units:
			3G2A6-LK201-EV1
			3G2A5-LK201-EV1

91