Omron NT631C manual Setting the Host Link Method, Select Maintenance Mode Select Memory Switch

Setting Conditions for Communications with Host by Using Memory Switches Section 6-7

6-7-2 Setting the Host Link Method

Set the communications conditions for the host link method at serial port A or serial port B by following the operation from the System Menu shown below.

Ver 4.12

Select Maintenance Mode.

Select Memory Switch.

Display the fourth memory switch screen by pressing the [↓] (next screen) or [↑] (previous screen) touch switch.

Press the touch switch corresponding to the port at which the host link method is to be set (Comm. A Method or Comm. B Method) to display the setting option Host Link.

The setting option changes each time the touch switch is pressed.

Press the Set touch switch to the right of the port at which the setting has been made.

155