DocTitleHeader
Figure 2-2: Wireless Ace : PPP/Ethernet
4.When you have finished configuring the Ethernet settings, click the Write button on the tool bar of Wireless Ace and wait for the message “Write Successful” to appear in the status bar.
Figure 2-3: Wireless Ace : Write
5.Note the IP address given to the modem by your cellular provider.
a.Select Status from the menu on the left side of Wireless Ace (under “Groups”).
Figure 2-4: Wireless Ace : Status (état)
b.Note the IP address listed in the Value column for the command *NETIP.
For *NETSTATE, “Network Ready” means your modem is connected on the cellular network and waiting for connections. “Network Dormant” means the modem is connected and waiting for connections but the connection has been idle. In either state, the modem is ready for the steps in the next section.
6.Disconnect your modem’s Ethernet cable from your computer, but leave the modem connected to power so it remains on the cellular network.
|
|
|
|
|
|
|
8 |
|
|
|
|
| 2120028 |
|
|
|
