12
KS-342
Front panel
The front panel is where you will make the majority of the set -
tings while you are using the KS -342.
Channel routing switch (x 4) Each channel has a switch that
allows the channel’s output to be routed to either the left (L),
right (R) or both (C) output busses.
In addition, channels 1 and 2 have another setting: MS, which
allows these channels to be operated in MS mode (with a
stereo microphone, for example). Both the 1 and 2 channels
must be set to MS, and various other features of the mixer also
change. These are detailed in the section later referring to the
MS mode.
LCF/PFL switch (x 4) Use this control to sweep the low- cut l-
ter frequency (–12dB/octave) between 20 Hz and 200Hz.
Though there is no way to turn this lter off, in practice, setting
the cutoff frequency to 20 Hz has the same effect a s turning it
off, as most microphone systems are not sensitive to sounds in
that frequency range.
Press this control (it is non -latching) to per form a pre-fade lis-
ten (PFL) on the channel (the level is shown on the right meter).
More than one of these PFL controls can be pressed at the same