Windows98/98SE

1.At the Add New Hardware Wizard, click Next.

2.Select Search for the best driver for your device (Recommended), then click Next.

3.Insert the driver CD, check Specify a location, uncheck the other boxes, type in D:\9x, click Next. (Change D: to match your CD-ROM drive letter)

4.Click Next, then Finish.

5.Repeat steps 1-4.

6.Restart Windows to complete the installation.

Windows ME

1.At the Add New Hardware Wizard, select Specify the location of the driver (Advanced), click Next.

2.Insert the driver CD, check Specify a location, uncheck the other box, type in D:\Me, then click Next. (Change D: to match your CD-ROM drive letter)

3.Click Next and Finish.

4.Repeat steps 1-3.

5.Restart Windows to complete the installation.

To Verify Windows 95/98/98SE/ME Installation

1.From the main desktop, right click My Computer, click Properties, then click Device Manager.

2.Double click Ports (COM & LPT), Printer Port...

and CyberParallel PCI should be displayed one time and CyberSerial PCI 16Cxxx... should be displayed two times.

3.Double click Multi-function adapters, SIIG CyberPro 2S1P PCI board should be displayed.

5

Page 5
Image 5
SIIG 2S1P manual Windows98/98SE, Windows ME, To Verify Windows 95/98/98SE/ME Installation