SIIG 2S1P manual Changing COM Port Address, To Verify Windows 2000/XP/Server Installation

4.Repeat steps 1-3three more times.

5.Restart Windows to complete the installation.

To Verify Windows 2000/XP/Server 2003

Installation

1.Right click My Computer, click Manage, then select Device Manager.

2.Double click Ports (COM & LPT), two CyberSerial PCI 16Cxxx... and one CyberParallel PCI... should be displayed.

3.Double click Multifunction adapters, SIIG CyberPro 2S1P PCI board should be displayed.

Changing COM Port Address

Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting.

Windows95/98/98SE/ME

1.From the Device Manager window double click Ports (COM & LPT), then double click the CyberSerial PCI serial port you want to change.

2.Click Settings tab, at the Port Name box click the down arrow and select a COM address that is not currently in use.

3.Click OK, then click OK again to close Device Manager to save the changes. Follow steps 1-3 again to change the second serial port if needed.

Windows2000/XP/Server2003

1.From the Device Manager window double click Ports (COM & LPT), then double click the CyberSerial PCI... serial port you want to change.

8