Manuals / Kodak / Computer Equipment / Printer

Kodak Series 3 manual Installing a new print cartridge, CAUTION Hot surface, avoid contact

Models: Series 3

1 30

Download 30 pages 36.44 Kb

Page 13

Installing a new print cartridge

Installing a new print cartridge

Before you begin, be sure the scanner is powered-on.

IMPORTANT: Do not remove or insert print cartridges while the printer is in the capped position. Use function code F40, Option 1 - Change Head(s) or damage can be done to the Super12 Document Printer.

To install a new print cartridge(s):

1.Enter function code F40 and press Enter. The following message will be displayed:

Print Head Position

1=Change Head(s) 2=Clean Printer

2.Select 1; a Please Wait message will be displayed. When this message is no longer displayed, open the front cover of the scanner.

Front cover

3.Note the current location of the Super12 Document Printer, then lift it out of the printer bracket and place it on the feeder top cover. This will make it easier to insert the print cartridges.

CAUTION: Hot surface, avoid contact.

12	A-61121 May 1999

Image 13

Kodak Series 3 manual Installing a new print cartridge, Print Head Position 1=Change Heads 2=Clean Printer

Contents

Super12 Document Printer User’s GuideA-61121 Part No. 1H7191 Using the Super12 Document Printer Printed information Print Location Changing the print location and print positionCAUTION Hot surface, avoid contact 6. Replace the belt module 7. Lower the transport plate Leading edge fed into transport first Print PositionStarting print position Trailing edgeEnabling/disabling the Super12 Document Printer F39 - Changing the print contrast Function codesF45 - Verifying print quality F49 - Aligning the print image To determine if all ink jets are functioning properly Print Head Position 1=Change Heads 2=Clean Printer Installing a new print cartridgeCAUTION Hot surface, avoid contact 6. Remove the protective tape from the bottom of the print cartridge CAUTION Hot surface, avoid contact 12. Perform function code F45 to test the print heads Cleaning guidelines MaintenanceDescription Supply Cleaning materials and supplies Cleaning the document printerCAT No Print Head Position 1=Change Heads 2=Clean Printer11. Wipe off any ink build-up on the rubber wipers Print Head Position 1=Change Heads 2=Clean PrinterTo replace the print cartridges Print Head Position 1=Change Heads 2=Clean PrinterCAUTION Hot surface, avoid contact Cleaning the transport areaCAUTION Hot surface, avoid contact Replacing the maintenance tray6. Open the package containing the new maintenance tray and remove it Storage and handling of print cartridges Problem TroubleshootingSolution Patch Reading turned off How print position is effected by patch readingPatch Reading turned on Patch Window ClosePrint Position Patch Reading ON - Print Position 1 inch - Patch Window is 4 inchesIMPORTANT When installing the print cartridges, be sure you Error codeshear and feel the print cartridge click into place Error E806 Printer System Error EASTMAN KODAK COMPANY Document Imaging Rochester, New York DOCUMENT I M A G I N GA-61121 Part No. 1H7191 3/99 Eastman Kodak Company Printed in U.S.A Printed on recycled paper