Manuals / Kodak / Computer Equipment / Printer

Kodak Series 3 manual Replacing the maintenance tray, CAUTION Hot surface, avoid contact

Models: Series 3

1 30

Download 30 pages 36.44 Kb

Page 22

Replacing the maintenance tray

Replacing the maintenance tray

Periodically the Super12 Document Printer maintenance tray may need to be replaced.

To access and replace the maintenance tray:

1.Open the front cover of the scanner.

2.Place the printer on the hanger bracket so it is out of the way.

CAUTION: Hot surface, avoid contact.

Hanger bracket

NOTE: Be sure the flex cable is placed between the two hooks so it does not get damaged.

3.Lift and lock the transport plate into place.

4.Lift and remove the belt module and place it aside.

Transport plate

Belt module

A-61121 May 1999

21

Image 22

Kodak Series 3 manual Replacing the maintenance tray, CAUTION Hot surface, avoid contact

Contents

Super12 Document Printer User’s GuideA-61121 Part No. 1H7191 Using the Super12 Document Printer Printed information Changing the print location and print position Print LocationCAUTION Hot surface, avoid contact 6. Replace the belt module 7. Lower the transport plate Starting print position Print PositionLeading edge fed into transport first Trailing edgeEnabling/disabling the Super12 Document Printer Function codes F39 - Changing the print contrastF45 - Verifying print quality F49 - Aligning the print image To determine if all ink jets are functioning properly Print Head Position 1=Change Heads 2=Clean Printer Installing a new print cartridgeCAUTION Hot surface, avoid contact 6. Remove the protective tape from the bottom of the print cartridge CAUTION Hot surface, avoid contact 12. Perform function code F45 to test the print heads Cleaning guidelines MaintenanceDescription CAT No Cleaning materials and supplies Cleaning the document printerSupply Print Head Position 1=Change Heads 2=Clean PrinterPrint Head Position 1=Change Heads 2=Clean Printer 11. Wipe off any ink build-up on the rubber wipersPrint Head Position 1=Change Heads 2=Clean Printer To replace the print cartridgesCleaning the transport area CAUTION Hot surface, avoid contactReplacing the maintenance tray CAUTION Hot surface, avoid contact6. Open the package containing the new maintenance tray and remove it Storage and handling of print cartridges Problem TroubleshootingSolution Patch Reading turned on How print position is effected by patch readingPatch Reading turned off Patch Window ClosePatch Reading ON - Print Position 1 inch - Patch Window is 4 inches Print PositionIMPORTANT When installing the print cartridges, be sure you Error codeshear and feel the print cartridge click into place Error E806 Printer System Error A-61121 Part No. 1H7191 3/99 Eastman Kodak Company Printed in U.S.A DOCUMENT I M A G I N GEASTMAN KODAK COMPANY Document Imaging Rochester, New York Printed on recycled paper