Error codes | Following is a list of errors codes you may encounter when using the | |
| Super12 Document Printer. | |
| Error: E133 Feeder waiting for printer. | |
| Probable cause: The feeder will not be ready until the printer has | |
| moved to the print position. | |
| Solution: Wait until the printer has moved into the print position. | |
|
| |
| Error: E206 Check Print Cartridge(s) | |
| Probable cause: This error may be displayed for one of the following | |
| reasons: | |
| ∙ Either no print cartridge(s) is installed or one or both print | |
|
| cartridge(s) may be installed but not making a good connection. |
| ∙ The print cartridge may be defective. | |
| ∙ The flex cable may not be working properly. | |
| Solution: Be sure the print cartridges are seated correctly and that they | |
| are making a good connection. | |
| 1. | Enter function code F56 to determine if more than 10 jets are out on |
|
| any one or more characters. |
| 2. | Press F40 and select Option 1, Change Heads. |
| 3. | Open the front cover of the scanner. |
| 4. | Lift the printer out of the printer bracket. One or both of the flex |
|
| cables lights will be blinking. |
| 5. | Determine which print cartridge is not making a good connection. |
|
| The blinking light(s) on the flex cable correspond with the print |
|
| cartridge that is not seated correctly. |
| 6. | Reinstall the print cartridges. |
|
| IMPORTANT: When installing the print cartridges, be sure you |
|
| hear and feel the print cartridge click into place. |
| 7. | Press the print head continuity button. If the flex cable lights stop |
|
| flashing, a good connection is made. |
| 8. | Place the printer back in the desired print location and close the |
|
| door. |
27 |