Maintenance
Cleaning guidelines
This section provides:
∙Recommended cleaning guidelines.
∙A list of catalog numbers and supplies needed to maintain the Super12 Document Printer.
∙Cleaning procedures for the Super12 Document Printer.
∙Instructions for changing the maintenance tray.
Use the following information as a guide when performing routine maintenance of the Super12 Document Printer.
The Super12 Document Printer maintenance varies with usage levels, paper types, print contrast and the number of characters printed. The following guidelines are recommended:
∙If you scan/film less than 5,000 documents per day, perform the maintenance procedures on the Super12 Document Printer once every two weeks.
∙If you scan/film more than 5,000 documents per day, perform the maintenance procedures on the Super12 Document Printer once a week.
The imaging guides, transport and sensor areas must also be cleaned daily to maintain print quality. Ink can accumulate in any one or all of these areas, reducing overall print quality. Cleaning may be required more often depending upon environmental conditions or paper types.
Refer to one of the following guides for detailed cleaning procedures:
A# | Description |
|
|
User’s Guide for the Kodak Digital Science Document | |
| Scanner 9500 |
|
|
User’s Guide for the Kodak Digital Science Document | |
| Scanner/Microimager 990 |
|
|
User’s Guide for the Kodak Imagelink Microimager 70 | |
|
|
Video Tape (PAL format) — Maintenance and Feeder | |
| Adjustment Procedures |
|
|
Video Tape (SECAM format) — Maintenance and | |
| Feeder Adjustment Procedures |
|
|
Video tapes and technical publications can be ordered through the BIS Customer Service Center at:
Rubber gaskets and the maintenance tray should be changed approximately every six months, this will vary with usage levels.
IMPORTANT: Do not use any cleaning solutions or solvents when performing these cleaning procedures.
16 |
