Manuals / Kodak / Computer Equipment / Printer

Kodak Series 3 manual Cleaning the transport area, CAUTION Hot surface, avoid contact

Models: Series 3

1 30

Download 30 pages 36.44 Kb

Page 21

Cleaning the transport area

Cleaning the transport area

To thoroughly clean the transport area, perform the following procedure:

1.Open the front cover.

2.Note the current location of the Super12 Document Printer, then lift it from the printer bracket, being careful not to strain the flex cable.

3.Place the Super12 Document Printer on the hanger bracket to keep it out of the way while you are cleaning other areas of the machine.

CAUTION: Hot surface, avoid contact.

NOTE: Be sure the flex cable is placed between the two hooks so it does not get damaged.

Hanger bracket

The following illustrations show the transport areas which need to be cleaned and how to clean them:

1. Lift the transport plate.

2.Wipe the transport plate surfaces with a slightly water-dampened, lint-free cloth to remove any ink deposits. Ensure that the topside of the print locations are clean.

3.Wipe the bottom of the transport plate thoroughly with a slightly water-dampened, lint-free cloth. Make certain that the underside of the print locations are clean.

4.Insert the Super12 Document Printer into the desired position in the transport plate, being careful not to strain the flex cable.

5.Close the front cover.

20	A-61121 May 1999

Image 21

Kodak Series 3 manual Cleaning the transport area, CAUTION Hot surface, avoid contact

Contents

User’s Guide Super12 Document PrinterA-61121 Part No. 1H7191 Using the Super12 Document Printer Printed information Print Location Changing the print location and print positionCAUTION Hot surface, avoid contact 6. Replace the belt module 7. Lower the transport plate Leading edge fed into transport first Print PositionStarting print position Trailing edgeEnabling/disabling the Super12 Document Printer F39 - Changing the print contrast Function codesF45 - Verifying print quality F49 - Aligning the print image To determine if all ink jets are functioning properly Installing a new print cartridge Print Head Position 1=Change Heads 2=Clean PrinterCAUTION Hot surface, avoid contact 6. Remove the protective tape from the bottom of the print cartridge CAUTION Hot surface, avoid contact 12. Perform function code F45 to test the print heads Maintenance Cleaning guidelinesDescription Supply Cleaning materials and supplies Cleaning the document printerCAT No Print Head Position 1=Change Heads 2=Clean Printer11. Wipe off any ink build-up on the rubber wipers Print Head Position 1=Change Heads 2=Clean PrinterTo replace the print cartridges Print Head Position 1=Change Heads 2=Clean PrinterCAUTION Hot surface, avoid contact Cleaning the transport areaCAUTION Hot surface, avoid contact Replacing the maintenance tray6. Open the package containing the new maintenance tray and remove it Storage and handling of print cartridges Troubleshooting ProblemSolution Patch Reading turned off How print position is effected by patch readingPatch Reading turned on Patch Window ClosePrint Position Patch Reading ON - Print Position 1 inch - Patch Window is 4 inchesError codes IMPORTANT When installing the print cartridges, be sure youhear and feel the print cartridge click into place Error E806 Printer System Error EASTMAN KODAK COMPANY Document Imaging Rochester, New York DOCUMENT I M A G I N GA-61121 Part No. 1H7191 3/99 Eastman Kodak Company Printed in U.S.A Printed on recycled paper