Kodak Series 3 manual Patch Reading ON - Print Position 1 inch - Patch Window is 4 inches

If the print position is set at less than 1 inch, the patch window will close at 2.5 inches after the lead edge; the printer can change up to 1 full print line and be able to print at the designated position. However, if more than 1 full print line needs to be changed, the image may drift down the page depending on how much more information needs to be changed.

Patch Reading ON — Print Position 0.25 inches — Patch Window is 2.5 inches

Print Position	Approximately
	¼-inch drift

Approximately ¾-inch drift

Approximately 1 ¾-inch drift

1 half print	1 full print line	2 half print	2 full print	3 half print	3 full print
line changed	changed	lines changed	lines changed	lines changed	lines changed

If your document is longer than 3 inches and the print position is set at 1 inch, the patch window will close at 4 inches after the lead edge; the printer can change up to a half print line and be able to print at the designated position. However, if more than a half print line needs to be changed, the image may drift down the page depending on how much more information needs to be changed.

Patch Reading ON — Print Position 1 inch — Patch Window is 4 inches

Print Position

Approximately	Approximately
½-inch drift	½-inch drift

Approximately 1-inch drift

Approximately 1½-inch drift

Approximately 2 ½-inch drift

1 half print	1 full print line	2 half print	2 full print	3 half print	3 full print
line changed	changed	lines changed	lines changed	lines changed	lines changed

For example, if 2 full print lines need to be changed, the image may print 1.5 inches further down the page; not at the designated 1 inch.

NOTE: Print drift may occur if you use function codes F39 or F49 while the transport is running.

26 A-61121 May 1999