Manuals / Kodak / Computer Equipment / Printer

Kodak Series 3 manual Changing the print location and print position, Print Location

Models: Series 3

1 30

Download 30 pages 36.44 Kb

Page 4

Changing the print location and print position

Changing the print location and print position

The location of the information you want printed on a document is determined by the print location of the Super12 Document Printer and the pre-defined print position.

Print Location

The Super12 Document Printer can be placed in one of six available locations across the transport plate. The orientation of the printer when in position 1, 2 or 3 is different than when the printer is in position 4, 5 or 6.

Super12

Document Printer

Printer bracket

Transport plate

Plastic strips cover print

locations

NOTE: Before you change print locations, remove the plastic strips covering the print locations you want to print in. The plastic strips cover the print locations on both the transport plate and the belt module (not shown in this illustration). Plastic strips should be left in place for any unused locations.

A-61121 May 1999

3

Image 4

Kodak Series 3 manual Changing the print location and print position, Print Location

Contents

Super12 Document Printer User’s GuideA-61121 Part No. 1H7191 Using the Super12 Document Printer Printed information Changing the print location and print position Print LocationCAUTION Hot surface, avoid contact 6. Replace the belt module 7. Lower the transport plate Print Position Leading edge fed into transport firstStarting print position Trailing edgeEnabling/disabling the Super12 Document Printer Function codes F39 - Changing the print contrastF45 - Verifying print quality F49 - Aligning the print image To determine if all ink jets are functioning properly Print Head Position 1=Change Heads 2=Clean Printer Installing a new print cartridgeCAUTION Hot surface, avoid contact 6. Remove the protective tape from the bottom of the print cartridge CAUTION Hot surface, avoid contact 12. Perform function code F45 to test the print heads Cleaning guidelines MaintenanceDescription Cleaning materials and supplies Cleaning the document printer SupplyCAT No Print Head Position 1=Change Heads 2=Clean PrinterPrint Head Position 1=Change Heads 2=Clean Printer 11. Wipe off any ink build-up on the rubber wipersPrint Head Position 1=Change Heads 2=Clean Printer To replace the print cartridgesCleaning the transport area CAUTION Hot surface, avoid contactReplacing the maintenance tray CAUTION Hot surface, avoid contact6. Open the package containing the new maintenance tray and remove it Storage and handling of print cartridges Problem TroubleshootingSolution How print position is effected by patch reading Patch Reading turned offPatch Reading turned on Patch Window ClosePatch Reading ON - Print Position 1 inch - Patch Window is 4 inches Print PositionIMPORTANT When installing the print cartridges, be sure you Error codeshear and feel the print cartridge click into place Error E806 Printer System Error DOCUMENT I M A G I N G EASTMAN KODAK COMPANY Document Imaging Rochester, New YorkA-61121 Part No. 1H7191 3/99 Eastman Kodak Company Printed in U.S.A Printed on recycled paper