Manuals / Kodak / Computer Equipment / Printer

Kodak Series 3 Cleaning materials and supplies Cleaning the document printer, Supply, CAT No

Models: Series 3

1 30

Download 30 pages 36.44 Kb

Page 18

Cleaning materials and supplies

Cleaning materials and supplies

Cleaning the document printer

Use the Super12 Maintenance Kit that comes with the Super12 Document Printer.

The Maintenance Kit contains the following:

∙Cleaning swabs

∙Rubber gaskets

∙A maintenance tray

The following supplies are available through your Kodak sales contact.

Supply	CAT No.

Super12 Maintenance Kit	165 8483

Black print cartridge (6/package)	822 1376

Red print cartridge (6/package)	145 6532

To clean the Super12 Document Printer, follow the steps below.

1.Enter function code F40 and press Enter. The following message will be displayed:

Print Head Position

1=Change Head(s) 2=Clean Printer

2.Select 1; a Please Wait message will be displayed. When this message is no longer displayed, open the front cover of the scanner.

3.Note the current location of the Super12 Document Printer, then lift it out of the printer bracket and place it on the feeder top cover.

CAUTION: Hot surface, avoid contact.

4.Remove the print cartridges. If there is any ink build-up on the print cartridges, clean it with a swab.

5.Place the printer back in the desired print location.

6.Close the front cover.

A-61121 May 1999

17

Image 18

Kodak Series 3 manual Cleaning materials and supplies Cleaning the document printer, Supply, CAT No

Contents

User’s Guide Super12 Document PrinterA-61121 Part No. 1H7191 Using the Super12 Document Printer Printed information Changing the print location and print position Print LocationCAUTION Hot surface, avoid contact 6. Replace the belt module 7. Lower the transport plate Starting print position Print PositionLeading edge fed into transport first Trailing edgeEnabling/disabling the Super12 Document Printer Function codes F39 - Changing the print contrastF45 - Verifying print quality F49 - Aligning the print image To determine if all ink jets are functioning properly Installing a new print cartridge Print Head Position 1=Change Heads 2=Clean PrinterCAUTION Hot surface, avoid contact 6. Remove the protective tape from the bottom of the print cartridge CAUTION Hot surface, avoid contact 12. Perform function code F45 to test the print heads Maintenance Cleaning guidelinesDescription CAT No Cleaning materials and supplies Cleaning the document printerSupply Print Head Position 1=Change Heads 2=Clean PrinterPrint Head Position 1=Change Heads 2=Clean Printer 11. Wipe off any ink build-up on the rubber wipersPrint Head Position 1=Change Heads 2=Clean Printer To replace the print cartridgesCleaning the transport area CAUTION Hot surface, avoid contactReplacing the maintenance tray CAUTION Hot surface, avoid contact6. Open the package containing the new maintenance tray and remove it Storage and handling of print cartridges Troubleshooting ProblemSolution Patch Reading turned on How print position is effected by patch readingPatch Reading turned off Patch Window ClosePatch Reading ON - Print Position 1 inch - Patch Window is 4 inches Print PositionError codes IMPORTANT When installing the print cartridges, be sure youhear and feel the print cartridge click into place Error E806 Printer System Error A-61121 Part No. 1H7191 3/99 Eastman Kodak Company Printed in U.S.A DOCUMENT I M A G I N GEASTMAN KODAK COMPANY Document Imaging Rochester, New York Printed on recycled paper