Manuals / Kodak / Computer Equipment / Printer

Kodak Series 3 manual F49 - Aligning the print image

Models: Series 3

1 30

Download 30 pages 36.44 Kb

Page 11

F49 — Aligning the print image

To align the print image so the left half of the image matches the right half of the image:

1.Enter function code F49.

2.Press Enter. The current alignment value will be displayed.

3.Press the up (−) arrow to move the left half of the image closer to

the leading edge of the document (the value will decrease) or press the down (↓) arrow to move the left half of the image farther away from the leading edge of the document (the value will increase).

4.Press Enter to save the value.

10	A-61121 May 1999

Image 11

Kodak Series 3 manual F49 - Aligning the print image

Contents

A-61121 Part No. 1H7191 User’s GuideSuper12 Document Printer Using the Super12 Document Printer Printed information Print Location Changing the print location and print positionCAUTION Hot surface, avoid contact 6. Replace the belt module 7. Lower the transport plate Trailing edge Print PositionLeading edge fed into transport first Starting print positionEnabling/disabling the Super12 Document Printer F39 - Changing the print contrast Function codesF45 - Verifying print quality F49 - Aligning the print image To determine if all ink jets are functioning properly CAUTION Hot surface, avoid contact Installing a new print cartridgePrint Head Position 1=Change Heads 2=Clean Printer 6. Remove the protective tape from the bottom of the print cartridge CAUTION Hot surface, avoid contact 12. Perform function code F45 to test the print heads Description MaintenanceCleaning guidelines Print Head Position 1=Change Heads 2=Clean Printer Cleaning materials and supplies Cleaning the document printerSupply CAT No11. Wipe off any ink build-up on the rubber wipers Print Head Position 1=Change Heads 2=Clean PrinterTo replace the print cartridges Print Head Position 1=Change Heads 2=Clean PrinterCAUTION Hot surface, avoid contact Cleaning the transport areaCAUTION Hot surface, avoid contact Replacing the maintenance tray6. Open the package containing the new maintenance tray and remove it Storage and handling of print cartridges Solution TroubleshootingProblem Patch Window Close How print position is effected by patch readingPatch Reading turned off Patch Reading turned onPrint Position Patch Reading ON - Print Position 1 inch - Patch Window is 4 incheshear and feel the print cartridge click into place Error codesIMPORTANT When installing the print cartridges, be sure you Error E806 Printer System Error Printed on recycled paper DOCUMENT I M A G I N GEASTMAN KODAK COMPANY Document Imaging Rochester, New York A-61121 Part No. 1H7191 3/99 Eastman Kodak Company Printed in U.S.A