Manuals / Kodak / Computer Equipment / Printer

Kodak Series 3 manual CAUTION Hot surface, avoid contact

Models: Series 3

1 30

Download 30 pages 36.44 Kb

Page 5

CAUTION: Hot surface, avoid contact.

To remove the plastic strips from a print location:

1.Open the front cover of the scanner.

2.Lift the printer from the printer bracket and place it on the hanger bracket to keep it out of the way.

CAUTION: Hot surface, avoid contact.

NOTE: Be sure the flex cable is placed between the two hooks so it does not get damaged.

Hanger bracket

3.Remove the plastic strips from any print locations (on the transport plate) that you will be printing in.

Plastic strips

4. Lift the transport plate and remove the belt module.

Transport plate

Belt module

4	A-61121 May 1999

Image 5

Kodak Series 3 manual CAUTION Hot surface, avoid contact

Contents

A-61121 Part No. 1H7191 User’s GuideSuper12 Document Printer Using the Super12 Document Printer Printed information Print Location Changing the print location and print positionCAUTION Hot surface, avoid contact 6. Replace the belt module 7. Lower the transport plate Leading edge fed into transport first Print PositionStarting print position Trailing edgeEnabling/disabling the Super12 Document Printer F39 - Changing the print contrast Function codesF45 - Verifying print quality F49 - Aligning the print image To determine if all ink jets are functioning properly CAUTION Hot surface, avoid contact Installing a new print cartridgePrint Head Position 1=Change Heads 2=Clean Printer 6. Remove the protective tape from the bottom of the print cartridge CAUTION Hot surface, avoid contact 12. Perform function code F45 to test the print heads Description MaintenanceCleaning guidelines Supply Cleaning materials and supplies Cleaning the document printerCAT No Print Head Position 1=Change Heads 2=Clean Printer11. Wipe off any ink build-up on the rubber wipers Print Head Position 1=Change Heads 2=Clean PrinterTo replace the print cartridges Print Head Position 1=Change Heads 2=Clean PrinterCAUTION Hot surface, avoid contact Cleaning the transport areaCAUTION Hot surface, avoid contact Replacing the maintenance tray6. Open the package containing the new maintenance tray and remove it Storage and handling of print cartridges Solution TroubleshootingProblem Patch Reading turned off How print position is effected by patch readingPatch Reading turned on Patch Window ClosePrint Position Patch Reading ON - Print Position 1 inch - Patch Window is 4 incheshear and feel the print cartridge click into place Error codesIMPORTANT When installing the print cartridges, be sure you Error E806 Printer System Error EASTMAN KODAK COMPANY Document Imaging Rochester, New York DOCUMENT I M A G I N GA-61121 Part No. 1H7191 3/99 Eastman Kodak Company Printed in U.S.A Printed on recycled paper