Improving the transmission quality
You can try the following measures to im- prove the quality in event of transmission disruptions:
•Change the position and/or direction of the transmitter q and/or receiver d.
•For problems with the remote control signal quality change the position of the infrared cable's 2# transmission diodes to the infrared receiver of the signal source.
•Try setting one of the other 4 trans- mission channels via the CHANNEL switch s and l.
Channel configuration (parallel operation)
You can operate up to 4 radio transmis- sion sets within close proximity of each other. Then you select, for each set, their own channel from the 4 different avail- able channels.
Expansion options
Expand the radio transmission set by connecting multiple transmitters q or receivers d.
Note:
If you want to control a receiver d selectively with several transmitters q you should never have several trans- mitters switched on at the same time. This prevents transmission disruptions.
Transmitter
Receiver
Cleaning
Risk of electric shock! Disconnect the wall plug transformer (1() from the mains power socket when you want to clean the radio transmission set.
Important!
Chemical cleansers may damage the radio transmission set.
Clean the radio transmission set only with a slightly damp cloth.
Troubleshooting
If a problem arises, please check the fol- lowing table first. If the problem cannot be resolved please contact one of the listed service locations.
No audio/video transmission
>Are the transmitter q and receiver d switched on?
>Are the transmitter channel switch s and the receiver channel switch l set to the same channel?
>The range of the radio transmission set is reduced by walls and ceilings. Reduce the distance between the transmitter q and the receiver d.
- 9 -
