- 8-
Programming the kitchen timer
You can save kitchen timer periods with the
buttons 1-6 r.
1. Press the button TIMERo.
2. Using the buttons UP/DOWNsprogramme in
the desired time.
3. Press the button MEMORY SETTINGu.
On the display "T" blinks.
4. Press the button for the desired memory save
location. There are 6 memory slots at your
disposal: Buttons 1-6 r. On the display the
number of the selected memory save location
appears.
5. Press the button MEMORY SETTINGuonce again.
The time is now saved.
To once again show the time, press the button
MODE SETTINGi.
6. To recall the saved kitchen timer settings, in auto-
matic mode press the button TIMERoand the
button of the corresponding memory save
location (Buttons 1-6 r).
7. Press the button TIMERoonce more to start the
kitchen timer. A clock symbol running in an
anti-clockwise direction appears on the display.
8. To return to automatic mode, press and hold
the button TIMERofor two seconds.
Alarm feature (Alarm1 and Alarm2)
You can programme two alarm times into your
kitchen radio.
Alarm function Symbol in the display
Acoustic signal
Radio
Switched off no symbol
1. In the automatic mode press the button
ALARM 1 f(or ALARM 2 d). The last set alarm
time and the symbol for the type of alarm are
shown on the display.
2. Press the buttons UP/DOWNsto set the desired
alarm time.
3. Press the button ALARM 1 f(or ALARM 2 d)
repeatedly until the desired alarm function
(see table above) is shown on the display.
4. Press the button ALARM MODE oto set the week-
days on which you require the alarm function:
You can choose between workdays (Mo, Tu,
We, Th, Fr), weekends (Sa, Su), the whole
week (Su, Mo, Tu, We, Th, Fr, Sa) and any indi-
vidual day.The selected setting is shown on
the display.
5. Press the button ALARM MODE orepeatedly until
the desired alarm days are programmed in.
Keep the button ALARM MODEopressed down
until a single day appears on the display.
6. Press the button ALARM MODE oto set the
required weekday.
To return to the selection of workdays, weekends
or whole weeks, once again hold the button
ALARM MODE obriefly pressed down.
7. Press the button MODE SETTINGito save the
settings and to return to automatic mode.
When the alarm signal sounds...
• and the alarm function "Radio" has been selected,
the radio plays for one hour at a pre-defined
alarm volume. To switch it off, press the button
ALARM 1 for ALARM 2 d.
• and the alarm function "Signaltones" has been
selected, the signal tone sounds for 10 minutes.
To switch it off, press the button ALARM 1for
ALARM 2 d.
IB_KH2289_DT33485_LB6.qxd 18.06.2009 12:16 Uhr Seite 8