ClearSounds A1600 manual Out of Range Alarm, Dialing Mode

█Out of Range Alarm

This function allows you to know when the handset is out of range of the base, and a beep will sound. Your ClearSounds® A1600 comes from the factory preset for Out of Range Alarm ON. To change this setting:

1.Press under the word Menu on the screen to display the main menu list.

2.Press up or down to scroll to HS Settings and then press under the word Select.

3.Press up or down to scroll to Tone Setup and then press under the word Select.

4.Press down to select Range Alarm and then press under the word Select.

5.Press up or down to select On or Off and then press  under the word Select.

█Dialing Mode

Your ClearSounds® A1600 comes from the factory preset for touch-tone service. Should you need to change this setting based on the type of phone service you have, use Tone for touch-tone service or Pulse for rotary dialing. NOTE: If you are not sure which dialing mode to select, please contact your local phone service provider. To change this setting:

1.Press under the word Menu on the screen to display the main menu list.

2.Press up or down to scroll to BS Settings and then press under the word Select.

3.Press down to select Dial Mode and then press under the word Select.

4.Press up or down to select Tone or Pulse and then press under the word Select.

52 – ENGLISH