1.Press 
under the word TAM to display the TAM main menu list.
2.Press up 
or down 
to scroll to TAM Settings and then press 
under the word Select.
3.Press 
under the word Select to choose Answer Mode.
4.Press up 
or down 
to select ANS & REC or Answer Only and then press
under the word Select.
Note: The Answer only message will be played if your answering machine becomes full.
Recording Outgoing Message
(each message can be up to 1 minute) Using the Handset to record “ANS & REC”:
The default announcement is “Please leave your message after the tone.”
To change the message:
1.Press 
under the word TAM to display the TAM main menu list.
2.Press up 
or down 
to scroll to TAM Settings and then press 
under the word Select.
3.Press down 
to select Announce and then press 
under the word Select.
4.Press 
under the word Select to select ANS & REC.
5.Press down 
to select Record MESS and then press 
under the word Select.
6.Record your announcement after the tone. Recording will stop automatically after 1 minute or you can confirm and end the recording by pressing 
under the word Select. During the recording, the LCD will show “Recording”.
7.The announcement will be played back immediately. If you do not like your message, record your announcement again or restore it to the default one.
