Restore Default Announcement(s)
1.You must use the base to restore the default announcement(s).
2.Press 
under the word Menu on the screen to display the main menu list.
3.Press 
or 
to scroll to TAM setup and then press 
under the word Select.
4.Press 
to choose Outgoing Msg and then press 
under the word Select.
5.Press 
or 
to choose Erase OGM and then press
under the word Select.
6.You will hear a confirmation beep and the recorded OGM is now deleted and the original default message returns.
█Message Options
Answering Machine Volume
When listening to your messages through the base, adjust the volume by using the Volume Control V- or V+ on the right side of the phone. When listening to your messages through the handset, adjust the volume by using the Vol+ or Vol- keys on the left side of the handset or up 
or down 
on the navigation key.
Screening Calls (only the handset can intercept the call)
1.When the answering machine answers the call, listen while the caller leaves a message.
2.To speak to the caller, pick up the handset and press
(If you have Auto Answer ON and your phone is in the
base, you will still need to press after picking up the handset).
The answering machine automatically stops recording when you activate the handset.
TIP: Make sure the volume on the phone is set loud enough to hear your incoming callers.
