ClearSounds A1600 manual Installing Batteries

Models: A1600

1 96
Download 96 pages 31.51 Kb
Page 19
Image 19

Installing Batteries

Three AAA re-chargeable Ni-MH batteries come with your phone. You must install the handset batteries before using your phone.

1.Remove the battery compartment cover by sliding it downwards.

2.Insert the new batteries. Be sure to observe battery polarity as imprinted on the inside of the compartment.

3.Replace the battery compartment cover by sliding upward until it clicks into place

Note: The batteries need to be replaced if they do not recover their full storage capacity after recharging. Check the battery icon on the LCD to see the battery charge level.

When replacing the batteries, always use good quality Ni-MH AAA re-chargeable batteries.

Charging the Handset

1.Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun.

2.Important: Before initial operation, you should fully charge the handset for at least 15 hours.

3.After the batteries are fully charged, check for dial tone by pressing the dial key on the handset.

When battery power is very low and you place the handset on

the base, the display will show . Check the battery icon on the LCD to see the battery charge level.

19 – ENGLISH

Page 19
Image 19
ClearSounds A1600 manual Installing Batteries