ClearSounds A1600 manual Dialing Mode Setting, Call Waiting Flash

█Dialing Mode Setting

Your ClearSounds® A1600 comes from the factory preset for touch-tone service. Should you need to change this setting based on the type of phone service you have, use Tone for touch-tone service or Pulse for rotary dialing.

NOTE: If you are not sure which dialing mode to select, please contact your local phone service provider. To change this setting:

1.Press under the word Menu on the screen to display the main menu list.

2.Press to scroll to Set Phone and then press under the word Select.

3.Press or to scroll to Dialing Mode and then press under the word Select.

4.Press or to select Tone or Pulse and then press theunder the word Save.

█Call Waiting (Flash)

Your ClearSounds® A1600 comes from the factory preset for Flash Time to 600ms. Flash timing is the signaling process that tells the phone system when a phone is on hook or off hook. The United States uses a 600ms timing sequence. The European Union uses a 300ms timing sequence. You can choose from 100ms, 300ms or 600ms. To change this setting:

1.Press under the word Menu on the screen to display the main menu list.

2.Press to scroll to Set Phone and then press under the word Select.

3.Press or to scroll to Set Flash and then press under the word Select.

4.The display shows the current setting. Press or to choose from 100ms, 300ms, or 600ms and then press under the word Select.

30 – ENGLISH