Remote Access
You can access many features of your answering machine remotely from any touch tone phone. A
Dial your phone number from any touch tone phone.
When the Announce1/Announce2 message starts to play, you may enter the remote access mode by inputting a 
and then the Security ID/PIN. If you enter the ID/PIN incorrectly, the machine will ask you to enter the ID/PIN again. You are given 2 more attempts to correctly enter the ID/PIN before the line is disconnected. After you enter the ID/PIN, the system will play the menu of commands. You can then follow the commands to operate.
Note: It is best to stop playing messages before hanging up the phone.
Reminder: Your answering machine must be turned ON in order to use remote access.
TROUBLESHOOTING
No dial tone
1.Check that all phone cord connections and AC adapter are securely plugged into the phone, wall jack and electric outlet.
2.Check that the handset batteries are installed properly and are in full power (page 19).
3.Check that the phone is in the correct dialing mode: tone or pulse (page 30 or 52).
4.Plug another phone into the wall jack to make sure your phone service is working.
Nothing appears on the display
1.Check that the handset batteries are installed properly and are in full power.
