█Handset Name
This feature allows you to give each registered handset a name in order to easily recognize each handset if you have more than one registered to the base. To set the handset name:
1.Press 
under the word Menu on the screen to display the main menu list.
2.Press up 
or down 
to scroll to HS Settings and then press 
under the word Select.
3.Press up 
or down 
to scroll to HS Name and then press 
under the word Select.
4.Enter the handset name (up to 9 characters) by using the keypad (see page 71 for the character map and instructions) and then press 
under the word Save to confirm and exit. The handset name will be displayed above your handset number in standby mode.
Note: If you make a mistake while entering the name, press 
under the word Erase to correct it. Each time you press this key, the last character is deleted.
█Delete/Terminate Handset
This function allows you to delete a handset that is registered to the base. To delete/terminate a handset:
1.Press 
under the word Menu on the screen to display the main menu list.
2.Press up or down
to scroll to BS Settings and then press under the word Select.
3.Press under the word Select to select Delete HS. The display will show PIN?
4.Enter the PIN (the default PIN is 0000) and then press 
under the word Select. If the PIN is validated, you will see a list of registered handsets.
5.Press up
or down
to scroll to the desired handset
that you would like to delete and press 
under the word Select. The selected handset will no longer be registered to the base.
