Silvercrest KH 2600 Electrical connections, Inserting back-upbatteries, Setting up and connecting

GB

IE

Setting up and connecting

Electrical connections

■Before connecting the device, compare the connection data (voltage and frequency) on the rating plate of the device with that of your power supply network. This data must tally in order to avoid damage to the device.

■Make sure that the device's connection cable is not damaged and is not laying over hot surfaces and/or sharp edges.

■Make sure that the connection cable is not tightly stretched or bent.

■Do not allow the connection cord to hang over edges (Trip wire effect).

Inserting back-up batteries

By inserting the batteries you can avoid the loss of programmed time of day and alarm wake time in the event of a possible power outage. The batteries make sure that the internal clock continues to run even during a power outage. When power is restored the correct time appears automatically in the display 4 .

NOTICE

►The back-up batteries only save the time of day and the programmed wake time. All other functions are only possible with mains power operation.

►The device can also be operated without batteries.

¡Slide the access cover of the battery compartment 26 on the underside of the device in the direction of the arrow and remove the access cover.

¡Insert 2 batteries type AA (supplied) into the battery compartment. Make sure that you observe the polarity as depicted in the battery compartment.

¡Close the battery compartment by replacing the access cover, slide back in and allow it to lock into place.

12 KH 2600