Silvercrest KH 2600 manual Disposal of the packaging, Requirements for the set-up location

Setting up and connecting

Disposal of the packaging

The packaging protects the device from transport damage. The packaging materials are chosen from an environmentally friendly and disposal technological point of view and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material and reduces generated waste. Dispose of packaging material that is no longer needed according to the regionally established regulations.

NOTICE

►If possible preserve the device's original packaging during the warranty period so that in the case of a warranty claim you can package the device properly for return.

Requirements for the set-up location

For safe and fault free operation of the device, the set-up location must fulfill the following conditions:

■Place the device on a firm, flat and level surface.

■To avoid overheating maintain a free space of at least 15 cm around and 40 cm above the device.

■Do not position the device in a dusty, hot, wet or very humid environment or in the vicinity of flammable materials.

■Protect the device from vibration.

■The surfaces of furniture may contain components that could affect and soften the rubber feet on the device. If necessary, place an anti-slip mat or similar under the rubber feet of the device.

■The wall socket must be easily accessible so that, in an emergency, the plug can be quickly withdrawn from the socket.

GB

IE

KH 2600 11