Handling and operation
Adjusting the volume
Prerequisite: The device is switched on.
¡Press the 
button 6 or 
button 7 on the device or on the remote control to adjust the volume. The set volume level is shown below and to the right in the display 4 .
NOTICE
►The set volume applies for all functions.
►The volume you have selected will also be saved automatically as the volume for the wake function.
Radio operation
NOTICE
►For a good radio reception the wire antenna 24 must be completely un- coiled. Adjust the antenna, whilst in radio operation, to the best reception.
Switching on the radio
¡Press the 
/ALARM OFF button 20 or the 
button on the remote control to switch the device on.
¡Press the FUNC. button 12 several times to
select the radio function. In the display 4
appears the symbol 
and the current recep- tion frequency of the set station.
Manual station selection
¡Press the ►►I button 11 or I◄◄ button 13 briefly to set the frequency of the desired station gradually with each button press.
Automatic station search
¡Press and hold down the ►►I button 11 or I◄◄ button 13 for at least two seconds. The device automatically searches for the nearest station with sufficient reception quality.
NOTICE
►If the reception quality is especially high, in the display 4 appears the
stereo symbol 
.
GB
IE
KH 2600 | 15 |
