Handling and operation
Alarm Function
When setting the wake time you configure the light intensity, the wake sound and the volume. In the 30 minutes before the set wake time the light intensity increases slowly to the selected level. When the set wake time is reached the sound level increases, within 90 seconds, slowly to the selected volume.
Programming alarm wake times
The device has two alarms available. All settings for both alarms can be carried out independently from each other. You can choose whether, at the programmed time, an alarm tone or a variety of nature sounds should be played, whether the radio should sound out or music from an iPod/iPhone or an external audio device should be played.
Prerequisite: The device is in standby mode.
¡Press the ALARM1/DOWN button 18/ ALARM2/UP button 16 on the device or the AL1/AL2 button on the remote control. The hour indicator in the display 4 blinks.
¡Set with the ►►I button 11 or the I◄◄ button 13 the hour. With each button press the time changes by one hour. Holding down the respective button for more than two seconds starts the speed setting.
¡Press the ALARM1/DOWN button 18/ ALARM2/UP button 16 on the device or the AL1/AL2 button on the remote control. The minute indicator in the display 4 blinks.
¡Set with the ►►I button 11 or the I◄◄ button
13 the minutes. With each button press the time changes by one minute. Holding down the re- spective button for more than two seconds starts the speed setting.
¡Press the ALARM1/DOWN button 18/ALARM2/UP button 16 on the device or the AL1/AL2 button on the remote control again to confirm the setting.
GB
IE
KH 2600 | 21 |
