PROC3
•Never look directly at the projection lamp.
Never look directly into the lamp when it is on as the inten- se light can damage your eyes. Take particular care that children cannot do so.
•Take special care regarding the movements of the lens.
Do not place objects in the slots on the side of the lens, and also ensure that the lens’s horizontal and vertical mo- vements are unimpeded by external objects.
•Position the unit on a stable surface.
Place the projector on a stable surface or use the provided ceiling mounting bracket.
Never place the projector on its side or rear, lens or top panel.
•Do not insert objects through the openings in the unit. Make sure that no objects are inserted inside the units. If this should occur, disconnect the unit from the power supply immediately and call an authorised technician.
•Switch Off.
Disconnect the mains when the projector is not in use. This will considerably reduce power consumption and also lengthen the service life of the unit’s electrical circuitry.
