Simer Pumps 2430 General Information, Description, Specifications, Discharge Fittings Chart

General Information 4

DESCRIPTION

This submersible pump is designed for use as a waterfall/fountain or as a utility pump. The unit is equipped with a 3-prong grounding-type power cord. Ball bearings on the motor shaft never need lubrication. Automatic reset thermal protection.

SPECIFICATIONS

Power supply required	115V, 60 HZ.
Motor duty	Continuous*
Liquid temperature range	32°F to 77°F (0°-25°C)
Individual branch circuit
requirement (minimum)	15 Amps

*For continuous operation the water depth must be at least 5” (13 cm) to prevent the motor from overheating.

NOTICE: Not designed for applications involving salt water or brine! Use with salt water or brine will void warranty.

DISCHARGE FITTINGS CHART

Pump
Model No.	Included Adapters
	1-1/4” FNPT x 1-1/4”
2430	Hose Barb Elbow (P/N 007-022)
	1-1/4” FNPT x 3/4”
	Garden Hose Fitting (P/N ZA000900)

ELECTRICAL SPECIFICATIONS

		Motor	Minimum	Pumps
	Motor	Full Load	Circuit	Down
Model	H.P.	Amps	Req. (Amps)	To
2430	1/3	2.3	15	7/8” (22 mm)

PERFORMANCE

			GPH (LPH) AT TOTAL FEET (M)				No Flow
	Motor	0	5	10	15	20	At Height
Model	HP	(0 m)	(1.5 m)	(3 m)	(4.6 m)	(6.1 m)	Shown Below
2430	1/3	2,400 (9,085)	1,920 (7,628)	1,380 (5,224)	780 (2,953)	240 (908)	22’ (6.7 m)

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867