Safety

2

READ AND FOLLOW

SAFETY INSTRUCTIONS!

This is the safety alert symbol. When you see this

symbol on your pump or in this manual, look for one of the following signal words and be alert to the potential for personal injury.

warns about hazards that will cause serious personal injury, death or major property damage if ignored.

warns about hazards that can cause serious personal injury, death or major property damage if ignored.

WARNING

Hazardous voltage. Can shock, burn, or cause death.

Ground pump before connecting to power supply. Disconnect power before working on pump, motor or tank.

Keep safety labels in good condition.

Replace missing or damaged safety labels.

Ground motor before connecting to power

supply.

Meet National Electri- cal Code, Canadian

Electrical Code, and local codes for all wiring.

warns about hazards that will or can cause minor personal injury or property damage if ignored.

The label NOTICE indicates special instructions which are important but not related to hazards.

Carefully read and follow all safety instructions in this manual and on pump.

ELECTRICAL SAFETY

Capacitor voltage may be hazardous. To discharge motor capacitor, hold insulated handle screw- driver BY THE HANDLE and short capacitor terminals together. Do not touch metal screwdriver blade or capac- itor terminals. If in doubt, consult a qualified electrician.

GENERAL SAFETY

Do not touch an operating motor. Modern motors are designed to operate at high temperatures. To avoid burns when servicing pump, allow it to cool for 20 minutes after shut-down before handling.

Do not allow pump or any system component to freeze. To do so will void warranty.

ATTACH ORIGINAL RECEIPT HERE FOR WARRANTY CONSIDERATION.

SIMER warrants to the original consumer purchaser (“Purchaser”) of its products that they are free from defects in material or workmanship.

If within twelve (12) months from the date of the original consumer purchase any such product shall prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the terms and conditions set forth below. Your original receipt of purchase is required to determine warranty eligibility.

Exceptions to the Twelve (12) Month Warranty

 

 

Product/Model No.

Warranty Period

 

 

 

 

M40P, M40, BW85P, CM10, CMK

90 days

 

 

 

 

2330, 2300, 2310, 2955, 2956, 2957, 2960, A5500

2 Years

 

 

 

 

4" Submersible Well Pumps, 3984, 3983, 2975PC, 2958, 2985, 3075SS

3 Years

 

 

 

 

Pre-Charge Water System Tank, 3986, 3985, 2956

5 Years

 

 

 

3988, 3995, 3997, 3963

Lifetime

 

 

 

General Terms and Conditions

Purchaser must pay all labor and shipping charges necessary to replace product covered by this warranty. This warranty shall not apply to acts of God, nor shall it apply to products which, in the sole judgement of SIMER, have been subject to negligence, abuse, accident, misapplication, tampering, alteration; nor due to improper installation, operation, maintenance or storage; nor to other than normal application, use or service, including but not limited to, operational failures caused by corrosion, rust or other foreign materials in the system, or operation at pressures in excess of recommended maximums.

Requests for service under this warranty shall be made by returning the defective product to the Retail outlet or to SIMER as soon as possible after the discov- ery of any alleged defect. SIMER will subsequently take corrective action as promptly as reasonably possible. No requests for service under this warranty will be accepted if received more than 30 days after the term of the warranty.

This warranty sets forth SIMER’s sole obligation and purchaser’s exclusive remedy for defective products.

SIMER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE DURATION OF THE APPLICABLE EXPRESS WARRANTIES PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

SIMER • 293 Wright Street • Delavan, WI U.S.A. 53115

Phone: 1-800-468-7867/1-800-546-7867 • Fax: 1-800-390-5351

E-Mail: info@simerpumps.com • Web Site: http://www.simerpumps.com

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

Page 2
Image 2
Simer Pumps 2802E, 2803, 2800E owner manual Read and Follow Safety Instructions, Electrical Safety, General Safety

2800, 2802E, 2802, 2800E, 2803 specifications

Simer Pumps is renowned for its innovative solutions in the water management sector, particularly with its range of submersible pumps. Among the standout models are the Simer Pumps 2803, 2800E, 2802, and 2802E. Each of these pumps boasts unique features that cater to various applications, focusing on efficiency, reliability, and ease of use.

The Simer 2803 is specifically designed for heavy-duty applications, making it ideal for residential and commercial use. Its robust construction allows it to handle significant volumes of water while ensuring durability. Featuring a powerful motor, the 2803 excels in continuous operation, making it suitable for dewatering basements, draining pools, or managing stormwater.

The Simer 2800E model offers enhanced efficiency with its energy-efficient motor technology. This pump is perfect for smaller applications, such as garden watering or aquariums, due to its compact design. The 2800E operates quietly and efficiently, reducing energy consumption without compromising performance. It comes equipped with a built-in float switch that automatically turns the pump on and off, adding to its user-friendly nature.

Moving on to the Simer 2802, this model combines performance with versatility. Its dual-voltage capability allows it to operate on both 115V and 230V power sources, making it suitable for a variety of settings. The 2802 is particularly favored for construction sites and agricultural use, where it can manage large volumes of water efficiently. The integrated thermal overload protection ensures the motor is safeguarded against overheating, prolonging its lifespan.

The Simer 2802E is an advanced variant of the 2802, incorporating additional features for professional users. It boasts an enhanced flow rate while maintaining a compact footprint, allowing it to fit into tighter spaces. This model also features a durable, corrosion-resistant housing, making it suitable for both fresh and saltwater environments.

Finally, the Simer 2800 is a reliable workhorse, perfect for everyday applications. It combines simplicity with functionality, offering a performance that aligns with residential needs. Easy to install and operate, the 2800 is an excellent choice for homeowners looking to manage water efficiently and effectively.

In summary, the Simer Pumps 2803, 2800E, 2802, 2802E, and 2800 represent a formidable lineup tailored to meet the diverse requirements of water management. Each model stands out thanks to its unique features, advanced technologies, and dependable performance, catering to both residential and professional users alike. Whether for heavy-duty tasks or smaller needs, Simer Pumps continues to deliver innovative solutions to its customers.