Troubleshooting, Adjustment & Service

MOWING HEIGHT ADJUSTMENT

 

 

The cutting height adjustment pin (A, Figure 34)

 

 

controls the mower cutting height. The cutting height

 

 

is adjustable between 1-3/4” (4,4 cm) and 5” (12,7

 

C

cm) in 1/4” (0,64 cm) increments.

 

1. Depress the deck lift foot pedal (B) until it locks

B

A

 

into the 5” (12,7 cm) position.

 

 

2. Place the cutting height adjustment pin in the desired cutting height.

3. Depress the deck lift foot pedal then push the lock lever (C) towards the right to release the lock.

4. Release the deck lift foot pedal until it comes to rest against the cutting height adjustment pin.

Figure 34. Mowing Height AdjustmentA. Cutting Height Adjustment PinB. Deck Lift Foot PedalC. Deck Lift Lock lever

 

Reproduction

 

 

FOOT PEDAL ADJUSTMENT

 

for

A

B

 

The deck lift foot pedal can be adjusted to

 

 

 

 

 

C

accommodate the operator’s height for optimal

 

 

 

 

 

 

comfort.

 

 

 

 

 

 

 

To adjust pedal position:

 

 

 

 

 

 

 

1. Remove the foot pedal (A, Figure 35) from the

 

 

 

 

OPTIONAL

pedal mount tab (B).

 

 

 

 

 

 

2. Remove the pedal mount hardware (C) and

tate

 

 

 

POSITION

the tab 180 degrees.

Not

 

 

 

 

 

3. Reinstall the pedal mount hardware and tighten

 

 

 

 

 

securely.

 

 

 

 

 

 

 

4. Reinstall the foot pedal on the pedal mount tab in

Figure 35. Foot Pedal Adjustment

 

the proper orientation as shown in Figure 35.

 

 

 

 

 

A. Deck Lift Foot Pedal

 

 

 

 

 

 

 

 

 

 

 

 

B. Pedal Mount Tab

 

 

 

 

 

 

C. Pedal Mount Hardware

 

 

Troubleshooting

37