Features& Controls
CONTROL LOCATIONS
The information below briefly describes the function of individual controls. Starting, stopping, and driving require the
combined use of several controls appfied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.
_ Speed Selector
Selects forward speeds
Traction Control / Free Hand TM Lock
Engages traction drive to wheels when depressed. Also locks auger control when depressed simultaneously. Releasing the traction control lever releases the Free Hand TM auger control lock and stops the drive wheels.
_._ Auger Control
Engages the auger/impeller when depressed. Releasing the control stops the auger/impeller.
r_ Fuel
Fuel tank filler cap (see illustration). Note: The fuel shut off valve is located under the fuel tank. Close the valve when the snowthrower is not in use. Open the valve before starting.
r_ Starter Handle
Used to
EPrimer Button
Primes carburetor for faster cold starting.
| Chute | Direction | Control | _ | Engine | Key |
|
|
|
| |||
|
|
|
| Prevents starting of engine without key. Stops engine | ||
Rotates the discharge chute to desired position. | when removed. | |||||
5_ | Chute | Deflector | Knob | W | Choke | Knob |
Locks | chute | deflector in desired position. | Adjusts air/fuel | mix for easier cold weather starting. | ||
Traction Lock Pins
The traction drive to each wheel can be locked and unlocked with the Traction Lock Pins (H, Figure 4) to per- mit the unit to
On/Off Switch
Prevents starting of engine.
r_ Electric Start Button (Optional)
Activates electric starter.
9
